Production Management Software in Madinah

Production Management Software in Madinah for plants where an order rarely yields exactly what the bill of materials says: record good output, scrap, offcuts and by-products against each job, and see the true yield before the order is closed.

Tracking yield with Production Management Software in Madinah
200+ Projects Delivered

What you get

  • Expected yield held on the bill of materials
  • Offcuts and by-products received to stock
  • Actual yield reported per order and item

Tracking yield with Production Management Software in Madinah

Madinah's industrial activity is centred on MODON Madinah Industrial City, with further plants in the Yanbu industrial area on the coast and new projects near Knowledge Economic City. In processing and fabrication, a job seldom turns inputs into exactly the planned output. Some material becomes reusable offcuts, some becomes a saleable by-product and some is simply lost. Symake's manufacturing system lets each production order record all of these outcomes, each with its own item code and value. Planners in Madinah then compare actual yield with the expected yield on the bill of materials and adjust it where the gap keeps repeating.

Book a Free Demo
0 + Projects Delivered
0 % Client Satisfaction
0 + Years of Experience
0 + Industries Served

Every output of a Madinah order

Main product, by-products, offcuts and losses on one order

Main output

Main output

The planned finished item is received to stock in full or in parts, each receipt adding to the order's progress.

Saleable by-products

Saleable by-products

Secondary items with resale value are received with their own code, and their value is credited to the order cost.

Reusable offcuts

Reusable offcuts

Leftover pieces that can feed another job go back to stock as a separate item, ready for future issue.

Process loss

Process loss

Normal losses such as trimming or evaporation are set as a planned percentage on the bill of materials line.

Abnormal scrap

Abnormal scrap

Losses above the planned level are booked with a reason, so they stand apart from expected waste.

Yield report

Yield report

Expected and actual yield are shown per order, per item and per line, over any date range you pick.

Cost split

Cost split

The total order cost is shared between main output and by-products using a rule finance agrees in advance.

BOM review

BOM review

Where actual yield drifts from the plan for several months, the engineer updates the bill of materials.

Material balance

Material balance

Inputs issued are compared with all outputs and losses, so nothing leaves the order unaccounted for.

Seeing where a Madinah job loses material
Seeing where a Madinah job loses material screenshot

Seeing where a Madinah job loses material

A planner in Madinah notices that one item keeps closing above its standard cost. The yield report shows why: offcuts are being thrown away instead of returned to stock, and scrap at one step runs higher than planned. Symake's manufacturing system shows both on the order history. The fix is a simple rule to receive offcuts, plus a closer look at that step, and the next month's orders close nearer to standard.

  • Orders closing above standard flagged
  • Yield gap traced to a single step
  • Offcuts returned instead of discarded
  • Next month's orders checked again
See a yield report →

Starting yield tracking in Madinah

Workshops in Jeddah, Riyadh or online, support from Bengaluru

Output list

We list every output your jobs produce, including items that today are thrown away or sold loose.

Item codes

By-products and offcuts get item codes, units and values, and are added to the relevant bills.

Yield targets

Expected yields and loss percentages are agreed per product with your plant engineer.

Training days

Supervisors join sessions in Jeddah or Riyadh, or online, on booking all outputs of a job.

Live orders

Orders run with full output booking, and the first yield reports are reviewed with you.

Monthly review

Remote support from Bengaluru helps refine yields as real results build up.

Production orders in Madinah

Plants in Madinah invoice under ZATCA rules, with VAT at 15%. Under FATOORA phase 2, wave 25 covers businesses whose VAT-subject revenue was above SAR 187,500 in any year from 2022 to 2025, and integration is due by 1 February 2027. By-products sold to other businesses are taxable supplies like your main products, so they need the same tax invoice with the Arabic fields ZATCA requires. Exports of goods outside the GCC are generally zero-rated. Symake applies the right tax code per item and customer.

By-product sales invoiced like main products
By-product invoices hold the same Arabic ZATCA fields
Tax code applied per item and customer
Integration for wave 25 by 1 February 2027

Yield you can measure, not guess

A plant can look busy and still lose money through poor yield. When every output and loss is booked on the order, Madinah managers can see which products waste the most and which by-products are worth selling rather than discarding.

✓ Yield per order, item and line
✓ By-product value credited to cost
✓ Offcuts reused on later jobs
✓ Planned loss kept apart from scrap
✓ Material balance on every order
✓ BOMs updated from real results
Explore yield tracking
Yield you can measure, not guess
Built for Manufacturing

Find the hidden losses in your Madinah plant

Bring one product's recent jobs to a session, and we will show its yield the way Symake records it.

Frequently Asked Questions

Where are workshops held for a plant in Madinah Industrial City?

Workshops are held in Jeddah or Riyadh, or online, depending on what suits your team. The rest of the project is delivered remotely from Bengaluru, with support hours that overlap the Saudi working day.

We have a second unit in the Yanbu industrial area. Can it share the yield reports?

Yes. Both sites use the same items and bills of materials, and the yield report can show each site separately or both together. Each site keeps its own stock and work centres.

Do by-product sales from a Madinah plant need ZATCA tax invoices?

Yes. A by-product sold to another business is a normal taxable supply at 15% VAT. The invoice is raised from stock like any other item and carries the Arabic fields ZATCA requires.

How is cost shared between the main product and a by-product?

Finance chooses a rule, usually crediting the by-product at a fixed value and leaving the rest on the main product. The rule is set per item and applied when the order closes.

What is the difference between process loss and scrap here?

Process loss is the expected waste written into the bill of materials. Scrap is anything above that, booked with a reason. Keeping them apart shows whether a job ran normally or not.

Can an offcut from one job be issued to another?

Yes. Offcuts received to stock are normal items with a quantity and value. A later order can issue them like any other component, which lowers its material cost.

Does yield tracking slow down the operators?

Only slightly. At the end of the job, or of the shift, the supervisor books good output, by-products and scrap on one screen. Most plants find this replaces an existing handwritten form.

Can we change expected yields later?

Yes. Expected yields live on the bill of materials and can be updated whenever real results justify it. Old orders keep the yield they were planned with, so history is not rewritten.

Call us WhatsApp