Production Management Software in Abu Dhabi

Production Management Software in Abu Dhabi follows each order from release to close: material issued in Mussafah, output and scrap recorded at the line, quality holds cleared, and the cost variance posted to your books.

What Production Management Software in Abu Dhabi tracks
200+ Projects Delivered

What you get

  • Every issue and return logged against its order
  • Failed batches held, reworked and then released
  • Al Ain and Mussafah orders in one filtered list

What Production Management Software in Abu Dhabi tracks

Workshops in Mussafah, assembly halls in KEZAD and process lines in ICAD all run on production orders, yet many still close them on a spreadsheet days after the goods have shipped. Symake's manufacturing system opens each order with its bill of materials and routing, reserves the components, and records every issue, return and output against it. When a batch fails inspection it goes on hold instead of into saleable stock, and a rework order is raised with its own labor and material. Groups with a second site in Al Ain see their orders in the same list, separated by plant. At month end the finance team reviews actual against standard for each closed order before the variance reaches the ledger.

Book a Free Demo
0 + Projects Delivered
0 % Client Satisfaction
0 + Years of Experience
0 + Industries Served

Nine stages of an Abu Dhabi production order

From the first release to the final variance entry

Order release

Order release

A planner releases the order only when its components are reserved, so the line does not start a job it cannot finish.

Material picking

Material picking

Pick lists are grouped by warehouse and bin, and the picker confirms the lot taken for each component before it leaves stock.

Output recording

Output recording

Operators record good quantity at each reporting point, and the order shows how much is complete and how much is still open.

Scrap with causes

Scrap with causes

Scrapped quantity is booked with a cause code, so the cost of waste shows per order rather than hiding in a stock adjustment.

Rework orders

Rework orders

Parts that can be saved go to a linked rework order with its own hours and material, keeping the original order cost clean.

Quality hold

Quality hold

Finished lots wait in a hold location until an inspector passes them, and only then become available for sale or dispatch.

Partial receipts

Partial receipts

Half of a large order can go to finished goods today while the rest stays in progress, with both quantities on one record.

Batch genealogy

Batch genealogy

Each finished batch keeps a record of the raw material lots it used, so a customer complaint can be traced back quickly.

Order close

Order close

Closing compares actual material and hours with the standard and posts the difference to variance accounts in the ledger.

Rework without losing the cost of the first run
Rework without losing the cost of the first run screenshot

Rework without losing the cost of the first run

A Mussafah fabrication shop often finds a weld or finish problem only at final inspection. In Symake, the inspector moves the failed quantity to a hold location and raises a rework order linked to the original. Extra hours and material go to the rework order, the original keeps its first-pass cost, and the plant manager can see how much rework each product needed this quarter.

  • Failed quantity moved to hold in one step
  • Rework order linked to the parent order
  • First-pass cost kept apart from repairs
  • Rework totals per product each quarter
See rework flow →

How one order moves through a KEZAD plant

Six checkpoints a production order passes before it closes

Create

The order is created from a sales line or a stock need, with the BOM version and routing fixed at that moment.

Reserve and release

Components are reserved in the warehouse and the order is released to the floor with its job card.

Issue material

Pickers issue lots against the order, and unused material comes back as a return, not a write-off.

Report output

Good units, scrap and by-products are entered as the work happens, at each operation that reports.

Inspect

Quality checks run on the finished lot, which stays on hold until it passes or goes to rework.

Close

Finished goods enter stock, the order is closed and its cost variance moves to the accounts.

Production orders in Abu Dhabi

Plants in Abu Dhabi charge VAT at 5% on most local sales of finished goods, and corporate tax at 9% applies to taxable profit, so the value placed on work in progress and finished stock flows into the tax numbers. E-invoicing starts on 1 January 2027 for businesses with revenue of AED 50 million or more and on 1 July 2027 for everyone else. Symake values each production order at actual cost, posts the variance when the order closes, and prepares structured data on every sales invoice. Exports of goods outside the GCC are generally zero-rated, and the invoice shows that treatment.

VAT at 5% on local sales of finished goods
Work in progress valued from real order costs
E-invoice data ready for the 2027 go-live dates
Zero-rated treatment on exports outside the GCC

How Symake rolls out production orders in Abu Dhabi

Symake, which has delivered 200+ projects, runs its work from Bengaluru. A consultant flies to Abu Dhabi to map your order flow on the floor, train supervisors in English and stay for go-live, then support continues remotely in hours that overlap the UAE working week.

✓ Order flow mapped on your shop floor
✓ BOMs and routings loaded before go-live
✓ Supervisors trained in English on site
✓ First month-end close reviewed with you
✓ Remote support in overlapping hours
✓ Al Ain site added when you are ready
Talk to a consultant
How Symake rolls out production orders in Abu Dhabi
Built for Manufacturing

Close every Abu Dhabi production order with a known cost

Send us one finished order from last month and we will rebuild it in Symake, from release to variance.

Frequently Asked Questions

Can a Mussafah workshop and a KEZAD plant share one order list?

Yes. Each site keeps its own warehouses and work centres, but supervisors and managers can filter one list by plant. Transfers of parts between the two are recorded, so the receiving order knows where its material came from.

How do we record scrap without distorting stock?

Scrap is entered against the order and the operation where it happened, with a cause. Stock is reduced once, and the order cost shows the lost material instead of a separate adjustment at month end.

What happens to a lot that fails final inspection?

It stays in a hold location and cannot be picked for delivery. The inspector either releases it after a recheck, scraps it, or sends it to a rework order that tracks the extra effort.

Can we receive part of an order into finished goods early?

Yes. You can post a partial receipt whenever a pallet or batch is ready. The order stays open for the balance, and each receipt is costed from what was used up to that point.

How is VAT handled when an Abu Dhabi plant sells finished goods locally?

Sales invoices carry VAT at 5% where it applies, and the invoice data is prepared for the UAE e-invoicing go-live: 1 January 2027 for revenue of AED 50 million or more, 1 July 2027 for the rest.

Will a consultant visit our plant in Abu Dhabi?

Yes, for the process workshop, supervisor training and go-live. Symake has no office in the UAE. The team delivers from Bengaluru, and remote support runs during hours that overlap your working day.

Do by-products get their own value on an order?

They can. A by-product is received into stock at a set value, and that value is credited to the order, so the main product carries a fairer cost and the by-product can be sold later.

Can our Al Ain site join later?

Yes. Al Ain can be added as a further plant with its own warehouses and work centres once the first site is stable, using the same item codes and costing rules.

Call us WhatsApp