Manufacturing and Production Management Software in Doha

Manufacturing and Production Management Software in Doha builds quality into the work order itself: inspection steps sit at the right operations, a failed result holds the lot, and head office sees every release decision for plants in Ras Bufontas, Umm Alhoul and Mesaieed.

Get a Free Consultation →

Manufacturing and Production Management Software in Doha for quality

200+ Projects Delivered

What you get

Inspections placed at the right operation
Lots held automatically on a failed result
Release decisions visible to head office

Manufacturing and Production Management Software in Doha for quality

Groups with their head office in Doha often run production away from the city, in the Doha Industrial Area, Ras Bufontas Free Zone or Mesaieed Industrial City. Quality managers then depend on forms sent back at the end of the day, after a bad lot may already have moved on. Symake places inspection points inside the routing, so a measurement is taken at the operation where it matters. If a result is outside the limit, the lot is held and cannot move to the next step until a quality lead acts. Managers in Doha see holds, rework and releases on the same screen as output.

Book a Free Demo

0 + Projects Delivered

0 % Client Satisfaction

0 + Years of Experience

0 + Industries Served

Quality and execution tools for Doha groups

Nine pieces that keep bad lots from moving on

Inspection plans

Define what to check, how often and the acceptable limits for each product and operation in one place.

Floor measurements

Operators enter readings on the tablet during the operation, and out-of-limit values are flagged straight away.

Automatic holds

A failed check stops the lot at that step, so it cannot be issued to the next work centre by mistake.

Rework orders

Held items can be sent for rework with their own operations and hours, keeping the cost of fixing visible.

Release sign-off

Only named quality staff can release a held lot, and the system records who released it and why.

Lot genealogy

Each finished lot lists the component and raw material lots used, so a complaint can be traced in minutes.

Incoming checks

Materials received from suppliers can be inspected before use, protecting the floor from bad inputs.

Equipment care

Maintenance tasks for gauges and machines are scheduled, so inspection results are not questioned because of worn tools.

Quality dashboard

Holds, rework rates and scrap by operation are shown for each plant to quality managers in Doha.

Complaints traced back in minutes

When a project buyer reports a defect, the first question is which other deliveries might share the same problem. Because every work order records the lots it consumed and the inspection results along the way, the quality team can search from the finished lot back to the raw material lot and then forward to every other order that used it. The answer comes from the system, not from searching paper folders.

Backward trace from finished lot to inputs
Forward trace to every affected delivery
Inspection results stored with each lot
Supplier lots recorded on receipt

Try a trace →

Setting up quality control from Doha

Six steps that start with your current inspection sheets

Sheet review

We collect your current inspection sheets and agree which checks belong at which operation.

Plan setup

Inspection plans with limits and frequencies are built per product and linked to the routings.

Lot rules

Lot numbering for raw materials and finished goods is agreed so traces work from the first day.

Floor training

Operators and inspectors learn the tablet screens at your plant, with sessions held in English.

Hold drills

Before go-live, test lots are failed on purpose to confirm holds, rework and releases behave correctly.

Live review

Rework and scrap figures are reviewed online with your quality manager after the first month.

Shop-floor control in Doha

Qatar has no VAT law in force yet, so plants run from Doha do not charge VAT today. Officials have said VAT is coming, and the system is ready to switch it on when Qatar introduces it, without rebuilding products or customers. An e-invoicing law has also been approved, though no dates are set, and invoice data can be structured once the rules are published. Plants in Qatar Free Zones keep records under their own zone licences. Weekends fall on Friday and Saturday, and support hours are arranged around your working week.

No VAT charged now, switch ready for when it starts

Invoice data ready for future e-invoicing rules

Free-zone plants kept as separate entities

Support hours planned around the Qatar week

Quality, production and records in one place

Inspection results, work orders and lots live in Symake's manufacturing ERP alongside purchasing, warehouses and accounts. A quality hold therefore affects planning and stock at once, and nobody has to update a separate quality spreadsheet.

✓ Inspection plans per operation

✓ Holds that block the next step

✓ Lot genealogy in both directions

✓ Rework cost tracked per order

✓ Incoming material checks

✓ Head office view of every plant

See a quality hold

Quality, production and records in one place

Built for Manufacturing

Hold bad lots at the source in Doha

Share one inspection sheet and we will show it running as checkpoints inside a routing.

Arrange a demo

Frequently Asked Questions

Can head office in Doha follow a plant located in Mesaieed?

Yes. The plant records operations and inspections on tablets, and head office in Doha sees the same data through a browser. Each site can be its own warehouse and set of work centres.

Does Symake charge VAT on invoices for Doha plants?

Not today, since no VAT law has come into force in Qatar. VAT can be switched on in the system when Qatar introduces it, using the products and customers you already have.

Can a plant in Ras Bufontas or Umm Alhoul be a separate company?

Yes. Free-zone plants can be set up as separate legal companies with their own books, while group management still sees combined production and quality figures.

Who is allowed to release a lot on hold?

You decide. Release rights are given to named quality staff, and every release records the person, the time and a reason in the lot history.

Can we inspect raw materials before they reach the floor?

Yes. Incoming inspection can be required for chosen materials or suppliers, and stock stays unavailable to work orders until it passes.

What if an inspection tool is out of calibration?

Gauges and test equipment can have maintenance plans like machines. Due dates are tracked so inspectors know when a tool needs attention before results are questioned.

How fast can we trace a customer complaint?

If lots were recorded at receipt and at each work order, a trace from finished lot to raw material lot, and on to other affected deliveries, takes minutes.

Do consultants visit Qatar for training?

Yes. Consultants travel from Bengaluru for setup workshops, operator training and go-live. Ongoing support is remote during hours that overlap the Qatar working week.